Home > News > Dryseal gets Zero in BBA test

Dryseal gets Zero in BBA test

Following a number of customer and specifier requests, Hambleside Danelaw submitted the Dryseal GRP mechanically fixed, component based waterproofing membrane to the British Board of Agrément for ‘zero-falls’ testing and accreditation.

After 6 months underwater at 60°C, Dryseal was then subjected to a series of rigorous tests for water penetration, material bond strength, indentation and tensile characteristics.

It passed with flying colours in September 2014, with “no water penetration”, and withstood a maximum tensile load requirement of over 22 kN/m, with negligible change from the original sample.

Now Agrément Certificate 95/3114 has been re-issued with full ‘zero-falls’ accreditation, meaning that Dryseal can be used on roofs with falls less than 1:80, a common requirement for terrace areas and roof gardens.

The NHBC will only allow the use of fully independently accredited waterproofing systems in ‘zero-falls’ installations. Dryseal has now been proven to achieve the requirements.

Andy Fell, Hambleside Danelaw Dryseal Manager, said: “We’re delighted at this authoritative proof that the advanced characteristics of Dryseal can easily satisfy the ever increasing demands made on modern roof covering systems.”

Share this page on your social networks

Main Hambleside Danelaw logo
Hambleside Danelaw Limited
Long March, Daventry, Northamptonshire, NN11 4NR, UK
+44 (0) 1327 701 900   |   +44 (0) 1327 701 909

© Hambleside Danelaw Limited